|
Definition: injection additional control unit. Functions: It manages the injection directly by connecting, in input, to the piloting signals of the original control unit and, in output, directly to the injectors. It can vary the amount of petrol injected in every cylinder. It can modify the final use, by reprogramming it and combining the suitable wiring. Real-time display of the map reading during the test. Efficiency: by acting directly on the injection signal it can operate on it with percentage values and a slight 15µS delay on the original signal. Acceleration pump available for all the motorbike models included in the price list. Connections: the control unit and the wiring are two separate parts, therefore they can be combined in different ways, being extremely flexible. The connectors are the same as the original ones and the connection is therefore very rapid. The connection to a PC is carried out by means of a connector located on the wiring and a Serial USB adaptor feeding the control unit, that can operate also when it is turned off. USB cable and Lite software available. Connection possible with all kinds of motorbike test tables for the auto-remapping by means of (Dyno-link) currently with Fuchs and Dynostar. |